English

German

Chinese
Home About us Products Catalogues Services R & D Jobs
News Contact us



Markets of ChenYang Products
Quality & Environment
Research & Development Works
 Sensors & Transducers
 Magnetics & Measuring Instruments
 Measurement Technology
 Digital Signal Processing
Publications
 List of books
 List of Journal Papers
 List of Conference Papers
Self-mixing interferometry for speed measurement
 Open loop Hall-Effect current sensors
 Optical Reflective Gear Tooth Sensor
 Method for Measuring Current Derivative Signal
 Rotational Speed Measuring and Calibration System
 Thermal drift of open-loop Hall Effect current sensor
 Direction Detection Based on the Output Duty Cycle
 Optimization of Conductor Structural Parameters
 Offset Error reduction in Hall Current Sensors
 Zero Offset Reduction in Hall Effect Sensors
 Error Correction of Automatic Testing Systems
 Design of Hall Effect Gear Tooth Speed Sensors
 Error Compensation of Hall Effect Current Sensors
 Parameter Optimization of Hall Gear Tooth Sensors
 Split Core Closed Loop Hall Current Sensors
 Mathematical Models of Gear Tooth Sensors
 Accuracy Improvement in Measuring & Test Systems
 Frequency-selective Adaptive Filtering
 Inductive eddy current sensors for stress measurement
 Fiber optic Bragg-grating sensors
 Capacitive Sensors for Displacement Measurement
 Self-calibration measuring methods
 Precise impedance measurement
 Measuring system of position transducers
 Self-correction algorithms
 Frequency selective-adaptive filtering
 Precise Fourier-analysis
 Parameter determination of damped oscillation signals
Competent Team
 Dr.-Ing. habil. Jigou Liu
 M.Sc. Jane Chen


List of Conference Papers (1996 - 2020)
 

Sensors for Measurements of Mechanical Quantities Sensors and Measurements of Electric Quantities Computer Controlled Measuring Methods and Systems
  • U. Frühauf and J.-G. Liu, Training of Computer-Controlled Measuring Systems, XVI IMEKO World Congress, Sept. 25-28, 2000, Vienna, Austria, vol. II, pp. 33-38
  • J.-G. Liu and U. Frühauf, Design for Self-Calibration of Instrumentation, XVI IMEKO World Congress, Sept. 25-28, 2000, Vienna, Austria, vol. II, pp. 61-66
  • U. Frühauf and J.-G. Liu, Fault-tolerant Measurements of Electrical Quantities Based on the Self-Calibration, IMEKO-XV World Congress, Osaka, Japan, June 13-18, 1999, vol. IV pp.135-141
  • J.-G Liu, U. Frühauf and A. Schönecker, On the Application of Special Self-Calibration Algorithm to Improve Impedance Measurement by Standard Measuring Systems, the 16th IEEE Instrumentation and Measurement Technology Conference, May 24-26, 1999, Venice, Italy, Vol.2, pp.1017-1022
  • J.-G. Liu and U. Frühauf, Self-Calibration in Measurements of Electrical Quantities by Using Lagrange-Interpolation, IMEKO-TC4 International Symposium on Development in Digital Measuring Instrumentation, September 17-18, 1998, Naples, Italy, pp. 493-498,
  • J.-G. Liu, A. Schönecker, U. Frühauf, U. Keitel, Self-Calibration Methods and Application to Impedance Measurement, International Conference on Soft Computing and Measurement, June 22-26, 1998, St. Petersburg, RUSSIA,
Digital Signal Processing
  • J.-G. Liu, C. Schmidt-Hattenberger and G. Borm, Parameter Determination of Damped Oscillation Signals by Discrete Fourier Transform and Self-Correction, Proceedings of the 10. International Sensor fairs and Conference, May 8-10, 2001, Nuremberg, Germany, Vol. I, pp.219-224
  • J.-G. Liu and U. Frühauf, Recursive Self-Correction Algorithm and Application to the Averaging of Discrete Periodic Signals, IMEKO-XV World Congress, Osaka, Japan, June 13-18, 1999, vol. IV pp.29-35
  • J.-G. Liu, A. Schönecker and U. Frühauf, Recursive Self-Correction Discrete Fourier Transform and Application to Impedance Measurement, the 6th Biennial Conference on Electronics and Microsystems Technology, October 7-9, 1998, Tallinn, Estonia, pp. 109-112,
  • J.-G. Liu and A. Schönecker, Recursive Self-Correction Algorithm of Discrete Fourier Transform and Application to Electrical Measurements, the 43rd International Scientific Colloquium, September 21-24, 1998, Ilmenau, Germany, pp. 515-520
  • J.-G. Liu and D.-H. Guo, An Improved Algorithm of Discrete Fourier Transform Based on the Recursive Self-Correction, 3rd National Congress of Youth Scientists, August 22-1998, Beijing, pp. 505-508,
  • J.-G. Liu, Recursive Self-Correction Algorithm and Application to Discrete Signal Processing, 1998 International Computer Symposium (ICS'98), Workshop on Algorithms, National Cheng Kung University Tainan, Taiwan, R. O. China, December 17-19, 1998, pp. 55-60
  • J.-G. Liu; A. Schönecker, U. Frühauf, U. Keitel and H.-J. Gesemann, Application of Discrete Fourier Transform to Electronic Measurements, the First International Conference on Information, Communications & Signal Processing, 9-12 September 1997, Singapore, Vol.3, pp.1257-1261
Testability Analysis of Analogue Circuits
  • J.-G. Liu and U. Frühauf, Testability improvements of analogue measuring circuits, XIV IMEKO WORLD CONGRESS, New Measurements-Challenges and Visions, Tampere, Finland, 1-6 June 1997, Vol. IV A, pp.1-6
  • U. Frühauf and J.-G. Liu, On The Evaluation and Analysis of The Testability of Analog Circuits in Measuring Systems, the International Symposium on New Measurement and Calibration Methods of Electrical Quantities and Instruments (8th IMEKO TC-4 Symposium), Budapest, 16-17 September 1996, pp.210-213
  • J.-G. Liu and U. Frühauf, System Modeling and Measurement Under the View of Design of Testability and Fault Diagnosis of Analog Circuits and Systems, the 5th Biennial Conference on Electronics and Microsystems Technology, Tallinn, October 1996, pp.295-298
Parameter Estimation of Analogue Circuits
  • J.-G. Liu and U. Frühauf, Testability-Based Parameter Measurement of Analog Measuring Circuits in the Frequency Domain, the 6th Biennial Conference on Electronics and Microsystems Technology, October 7-9, 1998, Tallinn, Estonia, pp.329-332
  • U. Frühauf and J.-G. Liu, Testability-based Parameter Measurement of Analog Measuring Circuits, Measurements 98, Kiew, Ukraine, October 1998
Ceramic Materials
  • A. Schönecker, H.-J. Gesemann, J.-G. Liu, and U. Keitel, Piezoceramic Actuator Material with Improved Stability, Meeting of the European Society of Ceramics Versailles - 22 -26 June 1997, Paris, France
  • A. Schönecker, H.-J. Gesemann, F. Schlenkrich, U. Keitel, and J.-G. Liu, Large signal properties and load limit of PMN-PNN-PT ceramics, Kongress und Ausstellung für Werkstoffe und Anwendungen, Werkstoffwoche'96, in German, 28-31 Mai 1996, Stuttgart, Germany
Invited Lectures
  • J.-G. Liu, Fault tolerant measuring methods, Measurement Colloquium, Dresden University of Technology, Faculty of Electrical and Information Engineering, November 15, 2002
  • J.-G. Liu, Fault tolerant measuring methods and applications to electronic measuring and test systems, Measurement Colloquium, Berlin University of Technology, Faculty of Electrical Engineering and Computer Science, May 31, 2002
  • J.-G. Liu, Adaptive filtering and applications to measurements of electrical and mechanical quantities, Honour Colloquium for Prof. Dr.-Ing. habil. Uwe Frühauf, Dresden University of Technology, Faculty of Electrical and Information Engineering, January 7, 2002, Dresden
  • J.-G. Liu, Improvement of measuring accuracy in measuring systems, Measurement Colloquium, Technical University of Clausthal, Department of Mechanical Engineering, December 3, 2001
  • J.-G. Liu, Improvement of measuring accuracy in electronic measuring and test systems, Measurement Colloquium, University of Freiburg, 05.Oktober.2001


ISO9001:2015
©
Technologies GmbH & Co. KG
Markt Schwabener Str. 8
85464 Finsing, Germany
Tel.: +49-(0)8121-2574100
Fax: +49-(0)8121-2574101
Email: info@chenyang.de
http://www.chenyang.de
 
Quality Management Manual
Delivery & Payment
General terms and conditions
Legal Notice
Disclaimer
Data Protection